Steelcraft Elevation Front Bumper



This front bumper by Steelcraft comes with a black textured powder coat finish. It does work with factory tow hooks. This bumper does work with the OE fog lights & tow hooks. It does not have a winch mount. It does not have a 2″ receiver hitch.

  • Installation hardware included.
  • 2 year MFG Warranty.


There are holes in it for front park assist sensors, but the sensors are not guaranteed & probably will not function correctly or at all. THE WIRE MAY ALSO NEED TO BE CUT & EXTENDED IN ORDER FOR THEM TO REACH. IF YOU DON’T HAVE SENSORS, THERE ARE RUBBER PLUGS FOR THE HOLES.

*It is built out of 10 Gauge steel. It really gives your truck the heavy duty protection, along with that sporty off road 4×4 look. This bumper is bolt -on, and requires no drilling to install. It is built to accommodate the factory fog lights & tow hooks. Although not included, it will accommodate a 20″ double row light bar, but not all 20″ light bars will work without modification.

The lower center grille section is removable for the front camera to see through.

We try to provide pictures of the exact part that we sale, but in some cases they are not available & what you see is very similar to the part described. In some applications the bumper installs to factory bumper bracketry. If yours has been damaged you may have to replace it to install this bumper.




  • Grille Guard, Non-Winch Front Bumper
  • Constructed from Sturdy Flat Steel
  • Textured Matte Black Finish
  • Features Cutout to Accomodate Most 20″ Double Row LED Light Bars (sold separately)
  • Supports Adaptive Cruise Control (if applicable)
  • Removable Front Panel Supports Front Emblem Cameras
  • Parking Sensor Cutouts are Standard (if applicable)
  • Easy, Bolt-On Installation on Most Applications
  • Retain Use of Factory Tow Hooks, Fog Lights, & License Plate Mount
  • Limited Lifetime Warranty


The Steelcraft Elevation Front Bumper is a top of the line non-winch bumper that will keep you, your passengers, and your vehicle safe. This grille guard front bumper was designed and manufactured with quality material and flawless workmanship to give you a heavy duty, sharp looking bumper. This massive, one-piece bumper has been fully welded from sturdy flat steel and features both an e-coat basecoat and a textured matte black powdercoating that will provide lasting protection from the elements. Whether you have a daily driver or work vehicle, this bumper is going to keep your front end protected when it matters.

The Steelcraft Elevation Front Bumper features a wrap-around grille guard design to keep your headlights protected and even includes front parking sensor cutouts and a removable screen for vehicles equipped with front parking cameras. You also can retain use of other factory features (if equipped) such as front license plate, tow hooks, fog lights, and adaptive cruise control! If that isn’t enough, Steelcraft has even included a center cutout that fits most 20″ Double Row LED Light Bars (sold separately). To top it all off, Steelcraft offers a Limited Lifetime Warranty that protects against manufacturer’s defects in materials or workmanship.


California Residents: Prop 65 Warning



Steelcraft bumpers come complete with installation instructions. Because of the size and weight of these bumpers, they are shipped by a truck freight and can be heavy to lift. When it comes to mounting, it is recommended that you have help with the lifting of the front bumper to avoid injury or damage to bumper and vehicle. However, they come with a no-drill, bolt on mount kit for easy installation. Recheck all hardware after the first couple hundred miles. It is advised to inspect the bumper and hardware periodically. 



Steelcraft guarantees the original purchaser that their Heavy Duty Steel products are free of manufactured defects in materials and workmanship for the life of the product. This excludes damage resulting from road hazards, debris, product misuse, improper installation, impairments from accidents, neglect, shipping, or product modification. This warranty applies only to new products and is limited to the repair or replacement of Steelcraft products. Warranty does not include the cost of removal, installation, labor, freight, inconvenience, or consequential damage. The original purchaser must return defective merchandise to the original place of purchase and must provide an original receipt.

Steelcraft products are designed as decorative accessories and should not be relied upon as protection for the vehicle or passengers. Buyers assume all risk and liability whatsoever resulting from the installation and use of Steelcraft products. Steelcraft assumes no liability for injury, loss, incidental or consequential damages in the event of an accident.

Steelcraft products should be routinely cleaned with a mild soap and water solution then dried fully with a clean dry terry cloth. Powdercoated products have a similar consistency as automotive paints and should be cared for similarly. Stainless Steel products require routine cleaning and polishing with a non-abrasive polish. Failure to do so may cause fading, corrosion, and ultimately void product warranty.


There are no reviews yet.

Be the first to review “Steelcraft Elevation Front Bumper”

Your email address will not be published. Required fields are marked *